Warmland PS45 Classic Series A Owner's Manual download pdf (Page 5)

PELLET STOVES 5 PS45 CLASSIC 151211-24

CAUTION: It is important to select and use only fuel that is

dry and free of dirt or other impurities such as high salt content.

"Dirty" fuel will adversely affect the operation and performance

of the unit and will void the warranty. We recommend the use of

pellets that meet or exceed the PFI standards. Ask your dealer

for a recommended pellet type.

Pellet fuel is made from sawdust and scrap wood from many

different species of wood. Pellets are either 1/4” or 5/16” in

diameter and vary in length. The Warmland PS45 Classic stove

will burn either diameter pellets.

ASH: The ash content of the fuel and operation of your stove

will directly determine the frequency of cleaning. The use of

high ash fuels may result in the stove needing to be cleaned

daily. Pellets made from hardwoods contain more ash than

those made from softwoods

CLINKERING: Clinkers are minerals, silica (sand) or other

impurities in the fuel that will form a hard mass during the

burning process. This heater has a burn pot cleaning system

designed to prevent clinkers from blocking the holes in the liner.

If they do become blocked, remove the liner (when the unit is

cold) and clean/scrape the clinkers out. Clean the holes with a

small pointed object if required. Refer to the section "Routine

Cleaning and Maintenance".

Wood Pellet Speci cations: This appliance has been

designed to burn wood pellets with up to 3% ash content. Dirty

fuel will adversely affect the performance of the stove.

Wood pellets manufactured to the pellet fuels institute (P.F.I.)

certi cation standard are available in two grades, Standard and

Premium. The primary difference between the two is the ash

content of the pellets.

The P.F.I. speci cation for standard grade and premium grade

residential pellet fuel is as follows:

• CHLORIDES (Salt): Less than 300 p.p.m. to avoid stove and

vent rusting.

• BULK DENSITY: 40 lb. / Cu. Ft. minimum

• MOISTURE CONTENT: 8% maximum

• ASH CONTENT: < 3% (standard grade)

< 1% maximum (premium grade)

• FINES: 0.5% maximum through a 1/8” screen

• BTU CONTENT: There are a number of variations in pellet

fuels that are not included in PFI standards. For example, BTU

(heat value) content may range from just under 7,000 to almost

9,000 Btu, depending upon species and region of the country

and other variables.

THE USE OF CORDWOOD IS PROHIBITED. Do

not burn garbage or  ammable  uids such as gasoline,

naptha or engine oil.

Stove Dimensions

FIG. #1

Weight - 325 pounds (147 Kg.)

Hopper Capacity - up to 52 pounds (23.5 Kg.) Results will vary

based on fuel density.

31 1/2"

27 3/8"

23 7/8"

16 1/2"

5 7/8"

10 5/8"

9 3/16"

1 2 3 4 5 6 7 8 9 10 ... 23 24

Comments to this Manuals

No comments

Warmland PS45 Classic Series A Owner's Manual Page 5

Comments to this Manuals